Formation of Flexible Manhole Connection
In case neither branch line nor house connection allowance are provided into an existing main sewer line, they can still be installed by means of saddle fitting or branch piece. Both require drilling of hole into the main line by the use of a drilling machine.
|Nominal Internal Diameter||(mm)||150||200|
The plain - ended branch piece is used in connection with the "B" ring. A drilling machine should be used for drilling the hole in the main pipe. All branch pieces come in standard strength.
Available in Sizes DN150 and DN200 SS
Saddles 45° and 90°
Due to the different curvature of the collar, the nominal internal diameter of the main pipe should be stated when ordering saddles.
All saddle fittings come in standard strength (Class SS) only.
|Main pipe Nominal Diameter (Mm)||Saddle Fittings Nominal Diameter (mm)|
Available ✓ Not Available ✕
Weight per Piece
Note: Clay Stoppers are available up to DN 600 only
Fixing Hook for End Plugs
Available in DN 150 and 200
When a connection between (SS) Pipe and (ES) Pipe is required, a short So/Sp piece "adaptor" is used. The socket end is of (ES) type and the spigot end is (SS) type.
|Nominal Internal Diameter
Socket (ES) / Spigot (SS)
| Weight per Piece
|200 X 200||17||30|
|250 X 250||30||28|
Available in container of 1 kg.
Recommended to use SVCP Lubricant only.